Controller N1200-3R-USB
€155.00
Delivery time: 2-3 working days after receipt of payment (advance payment) or conclusion of contract
| Description: | Controller |
|---|---|
| Accuracy: | depending on the selected sensor type, see datasheet |
| A/D resolution: | Internal: 15 Bit |
| Dimensions: | (LxWxH) 100 x 48 x 48 mm (control panel cut-out 45.5 x 45.5 and installation depth 97 mm) |
| Input: | Thermocouples type J, K, T, N, R, S or Pt100/3-wire, 0…50mV, 0…20 mA, 4…20 mA, 0…5 V, 0…10 V |
| Analogue input: | Second analogue input for external setpoint input in 4...20 mA |
| Input impedances: | Thermocouples, Pt100 and 0…50 mV: >10 MΩ, 0…20 mA and 4…20 mA: 15Ω, 0…5 V and 0…10 V: >1 MΩ |
| Output: | 1 contact relay SPDT (I/O3), max. load 3 A / 250 V AC (3 A / 30V DC);2 open contact relays SPST (I/O1,I/O2), max. load 3 A / 240 V AC (3 A / 30V DC);1 analogue output (I/O5) for: 0(4)-20 mA, control output for actual setpoint transmission, max. load 550 Ω |
| Power supply: | 100...240 V AC (±10%), 50…60 Hz |
| Type of control: | PID, autotuning, ON/OFF or manual |
| Measuring rate: | 55/s |
| Type of protection: | IP65 on the front (when installed correctly) |
| Configuration: | Front buttons/USB |
| Ambient conditions: | 0 to +50 °C, max. 80% RH for temperatures up to +30 °C. Above +30 °C, the max. humidity is reduced by 3% RH per °C. Indoor installation with max. altitude of 2000 m, environmental index 2 |
| Weight: | 0.16 kg |
In automation engineering, digital Controllers are used to set and stabilize the variable processes for the users pre-defined values.
The N1200 is a universal process controller. It has been developed to combine all controller characteristics which are important for industrial processes in one device. It can be integrated in industrial as well as in building and laboratory process automation.
The main characteristics of the N1200 are:
- Universal sensor input for thermocouples, Pt100, 0(4)…20 mA, 0…50 mV or 0…5 V signals
- Protection against sensor Failure
- Control outputs programmable as relay, linear 0(4)…20 mA or pulsed logic voltage output
- Auto – tune function
- Up to 4 programmable alarms
- Up to 2 timer functions, which can be associated to the alarms
- Process variable PV or set point SV retransmission as 0(4)…20 mA analog signal
- External set point input as a 4…20 mA standard signal
- Programmable Soft-start (0-9999 seconds)
- RS485 with RTU-Modbus protocoll (optional)
- 20 Setpoint profile programmes, with 9 segments each with the abilitity to be linked for a total of max. 180 Segments
- USB port for easy configuration on a PC, with the free software NConfig
| Description: | Controller |
|---|---|
| Accuracy: | depending on the selected sensor type, see datasheet |
| A/D resolution: | Internal: 15 Bit |
| Dimensions: | (LxWxH) 100 x 48 x 48 mm (control panel cut-out 45.5 x 45.5 and installation depth 97 mm) |
| Input: | Thermocouples type J, K, T, N, R, S or Pt100/3-wire, 0…50mV, 0…20 mA, 4…20 mA, 0…5 V, 0…10 V |
| Analogue input: | Second analogue input for external setpoint input in 4...20 mA |
| Input impedances: | Thermocouples, Pt100 and 0…50 mV: >10 MΩ, 0…20 mA and 4…20 mA: 15Ω, 0…5 V and 0…10 V: >1 MΩ |
| Output: | 1 contact relay SPDT (I/O3), max. load 3 A / 250 V AC (3 A / 30V DC);2 open contact relays SPST (I/O1,I/O2), max. load 3 A / 240 V AC (3 A / 30V DC);1 analogue output (I/O5) for: 0(4)-20 mA, control output for actual setpoint transmission, max. load 550 Ω |
| Power supply: | 100...240 V AC (±10%), 50…60 Hz |
| Type of control: | PID, autotuning, ON/OFF or manual |
| Measuring rate: | 55/s |
| Type of protection: | IP65 on the front (when installed correctly) |
| Configuration: | Front buttons/USB |
| Ambient conditions: | 0 to +50 °C, max. 80% RH for temperatures up to +30 °C. Above +30 °C, the max. humidity is reduced by 3% RH per °C. Indoor installation with max. altitude of 2000 m, environmental index 2 |
| Weight: | 0.16 kg |
In automation engineering, digital Controllers are used to set and stabilize the variable processes for the users pre-defined values.
The N1200 is a universal process controller. It has been developed to combine all controller characteristics which are important for industrial processes in one device. It can be integrated in industrial as well as in building and laboratory process automation.
The main characteristics of the N1200 are:
- Universal sensor input for thermocouples, Pt100, 0(4)…20 mA, 0…50 mV or 0…5 V signals
- Protection against sensor Failure
- Control outputs programmable as relay, linear 0(4)…20 mA or pulsed logic voltage output
- Auto – tune function
- Up to 4 programmable alarms
- Up to 2 timer functions, which can be associated to the alarms
- Process variable PV or set point SV retransmission as 0(4)…20 mA analog signal
- External set point input as a 4…20 mA standard signal
- Programmable Soft-start (0-9999 seconds)
- RS485 with RTU-Modbus protocoll (optional)
- 20 Setpoint profile programmes, with 9 segments each with the abilitity to be linked for a total of max. 180 Segments
- USB port for easy configuration on a PC, with the free software NConfig
Similar articles
Other customers also bought
Other customers also bought
We generally offer standard shipping via DPD. You can also pick up your order yourself or ship with your own tracking number. You can select the option you prefer during the ordering process.
You find more information about this topic on our rights of withdrawal page.
You can pay with PayPal, credit card (VISA and MaserCard), payment in advance, Sofortüberweisung (direct banking) and in some cases invoice. You can find more information on the page shipping and payment.
Yes, at B+B we can manufacture customised items for you with a minimum order value of €500.00.
Certifications
Thank to the latest research, development and manufacturing technologies, as well as DIN EN ISO 3001:2015 and DIN EN 61340-5-1 certifications, we produce our products in accordance with the highest quality standards.
Calibration service
Individual manufacturing
You tell us your application and we will supply you with the right product for measurement and monitoring. We place particular emphasis on close cooperation in order to guarantee optimal product development in live with your requirements.
Location
B+B Thermo-Technik GmbH is based in the town Donaueschingen south-west Germany. From here, B+B quality products are distributed worldwide.