Digital humidity and temperature probe for Hytelog Multisensor HYT271-S | 0x2A
€105.62
Delivery time: 2-3 working days after receipt of payment (advance payment) or conclusion of contract
| Description: | Digital humidity and temperature probe |
|---|---|
| Measured parameter: | Humdity and temperature |
| Sensor: | Digital humidity and temperature sensor HYT271-S |
| Temperature measuring range: | -40...+125 °C |
| Accuracy temperature: | ±0.2 °C (0...+60 °C) |
| Humidity measuring range: | 0...100% RH |
| Accuracy humidity: | ±2% RH at +23 °C |
| Resolution: | 14 bit |
| Tube material: | Stainless steel 1.4571 |
| Tube length incl. filter: | 150 mm |
| Tube diameter: | Ø 12 mm |
| Cable: | AWG28, PVC insulated, outer diameter 5.0 mm |
| Cable length: | 3000 mm |
| Connection: | RJ12 connector |
| Output signal: | Digital, I²C |
| I²C address: | 0x2A |
| Operating voltage: | 2.7...5.5 V DC |
| Power consumption: | typ. < 22 µA at 1 Hz measuring rate, 850 µA maximum |
| Protective filter: | Stainless steel 1.4404, pore size 45 µm, Ø 12 x 20 mm |
| Type of protection: | IP65 (except plug and sintered filter) |
| Special feature: | For use with the HYTELOG multisensor measuring system |
| Weight: | 0.1338 kg |
Highly precise probe for the combined humidity and temperature measurement, encapsulated in robust stainless steel housing and sinter filter. The RJ12 allows a very easy use with our HYTELOG Multisensor interface.
The innovative humidity and temperature probe uses a I²C-interface communication protocol. The probe is calibrated ex factory to a high measurement accuracy both for temperature (±0,2 °C) and humidity (±0,18 %RH) and an extensive temperature range up to 125 °C.
The humidity and temperature probe is ebcapsulated in a high quality stainless steel housing using a stainless steel sinter filter with pore size about 45 µm. the filter protects the sensors from mechanical damages and dirt and at the same time allows a relative rapid air circulation between the ambient air and the measurement chamber (good response time). The RJ12 Connector enables an easy and fast connection to our HYTELOG Multisensor interface. The digital I²C output signal can also be prcessed via a microcontroller (µC). The probe has standardly an I²C bus address 0x2A. This can be changed with a µC or with the B+B I2C-USB interface adapter.
With the Hytelog humidity and temperature measuring system you have the option of connecting 3 sensors at the same time. The temperature or humidity sensors can be easily connected via the three RJ12 sockets. It only has to be considered that the sensors have different I²C addresses. When used with the Hytelog multisensor, only the addresses 0x28,0x29 and 0x2A are permitted.
Cable lengths of 10, 15, and 20 m are available under request.
Typical area of application
- Building technology
- Industrial measurement and control technology
- Climate monitoring and use in drying processores such as tea or tobacco
| Description: | Digital humidity and temperature probe |
|---|---|
| Measured parameter: | Humdity and temperature |
| Sensor: | Digital humidity and temperature sensor HYT271-S |
| Temperature measuring range: | -40...+125 °C |
| Accuracy temperature: | ±0.2 °C (0...+60 °C) |
| Humidity measuring range: | 0...100% RH |
| Accuracy humidity: | ±2% RH at +23 °C |
| Resolution: | 14 bit |
| Tube material: | Stainless steel 1.4571 |
| Tube length incl. filter: | 150 mm |
| Tube diameter: | Ø 12 mm |
| Cable: | AWG28, PVC insulated, outer diameter 5.0 mm |
| Cable length: | 3000 mm |
| Connection: | RJ12 connector |
| Output signal: | Digital, I²C |
| I²C address: | 0x2A |
| Operating voltage: | 2.7...5.5 V DC |
| Power consumption: | typ. < 22 µA at 1 Hz measuring rate, 850 µA maximum |
| Protective filter: | Stainless steel 1.4404, pore size 45 µm, Ø 12 x 20 mm |
| Type of protection: | IP65 (except plug and sintered filter) |
| Special feature: | For use with the HYTELOG multisensor measuring system |
| Weight: | 0.1338 kg |
Highly precise probe for the combined humidity and temperature measurement, encapsulated in robust stainless steel housing and sinter filter. The RJ12 allows a very easy use with our HYTELOG Multisensor interface.
The innovative humidity and temperature probe uses a I²C-interface communication protocol. The probe is calibrated ex factory to a high measurement accuracy both for temperature (±0,2 °C) and humidity (±0,18 %RH) and an extensive temperature range up to 125 °C.
The humidity and temperature probe is ebcapsulated in a high quality stainless steel housing using a stainless steel sinter filter with pore size about 45 µm. the filter protects the sensors from mechanical damages and dirt and at the same time allows a relative rapid air circulation between the ambient air and the measurement chamber (good response time). The RJ12 Connector enables an easy and fast connection to our HYTELOG Multisensor interface. The digital I²C output signal can also be prcessed via a microcontroller (µC). The probe has standardly an I²C bus address 0x2A. This can be changed with a µC or with the B+B I2C-USB interface adapter.
With the Hytelog humidity and temperature measuring system you have the option of connecting 3 sensors at the same time. The temperature or humidity sensors can be easily connected via the three RJ12 sockets. It only has to be considered that the sensors have different I²C addresses. When used with the Hytelog multisensor, only the addresses 0x28,0x29 and 0x2A are permitted.
Cable lengths of 10, 15, and 20 m are available under request.
Typical area of application
- Building technology
- Industrial measurement and control technology
- Climate monitoring and use in drying processores such as tea or tobacco
Similar articles
Similar articles
Other customers also bought
Other customers also bought
We generally offer standard shipping via DPD. You can also pick up your order yourself or ship with your own tracking number. You can select the option you prefer during the ordering process.
You find more information about this topic on our rights of withdrawal page.
You can pay with PayPal, credit card (VISA and MaserCard), payment in advance, Sofortüberweisung (direct banking) and in some cases invoice. You can find more information on the page shipping and payment.
Yes, at B+B we can manufacture customised items for you with a minimum order value of €500.00.
Certifications
Thank to the latest research, development and manufacturing technologies, as well as DIN EN ISO 3001:2015 and DIN EN 61340-5-1 certifications, we produce our products in accordance with the highest quality standards.
Calibration service
Individual manufacturing
You tell us your application and we will supply you with the right product for measurement and monitoring. We place particular emphasis on close cooperation in order to guarantee optimal product development in live with your requirements.
Location
B+B Thermo-Technik GmbH is based in the town Donaueschingen south-west Germany. From here, B+B quality products are distributed worldwide.