Flue gas probes
Flue gas probes
Flue gas probes are generally suitable for exhaust gas analysis in combustion plants, for determining efficiency and for determining exhaust gas loss and emissions.
The measuring principle of the Sigma flue gas probe, for example, is based on a type K sheath thermocouple in accordance with IEC 584, class 1. This is used for highly accurate temperature measurement. The separate gas and pressure paths guarantee maximum accuracy. A special feature of this probe is the heated pistol grip. This heating reduces condensation. The handle also has a soot filter holder. The cone is used to attach and position the flue gas probe in the core flow of stationary systems.
The Eco TGD flue gas probe is used for combined temperature, gas and pressure measurement. Exhaust gas temperatures of up to 800 °C can be measured using a sheath thermocouple (type K). All components used are internationally standardised. The probe is suitable for all combustion plants subject to the guidelines of the 1st BImSchV. It is used to determine the efficiency, exhaust gas loss, emissions, temperature in the exhaust gas stream and nominal heat output.
At B+B, you will find various gas probes that differ from one another in terms of their operating principle and thus their area of application. B+B Thermo-Technik GmbH's product range basically includes flue gas probes, a multi-hole probe and exhaust gas probes.
Yes, customised designs are available on request. Please note that due to the planning and implementation costs involved, we can only produce customised designs for orders with a minimum value of €500.00.
Exhaust gas probes are used for monitoring and control in heating technology, buildings, industrial plants, combustion plants, vehicles and large vehicles such as tanks to monitor emissions and ensure efficiency and safety. They help to monitor compliance with environmental regulations and increase safety by controlling exhaust gases.
B+B offers probes with a heated pistol grip. This heating reduces condensation. The handle also has a soot filter holder. B+B also sells probes for combustion plants (1. BImSchV), multi-hole probes and special probes for exhaust gas measurements on large vehicles, e.g. lorries, buses and tanks.
The Firebird TGD flue gas probe has a screw-off coaxial probe tube, separate gas/pressure paths, a stainless steel protective tube and a moulded handle. The Eco TGD flue gas probe also has a moulded handle and impresses with its fast response time. In addition, a slotted hole is visible on the measuring tip. The Sigma flue gas probe, on the other hand, differs in particular in its heated handle, optional screw-off probe tube and R6 soot filter holder.