Humidity regulator for sanitary rooms
€95.25
Delivery time: 2-3 working days after receipt of payment (advance payment) or conclusion of contract
| Description: | Humidity controller |
|---|---|
| Operating temperature: | 0...+40 °C |
| Humidity measuring principle: | Capacitive humidity sensor |
| Humidity measuring range: | 0...100% RH |
| Switching point: | 70% RH or fast increase in humidity |
| Switch-on delay: | 40 s |
| Switch-off delay: | 300 s |
| Humidity Off switching input: | 230 V AC / approx. 1 mA |
| Light switching input: | 230 V AC / approx. 1 mA |
| Switching output: | 1 A/230 V/AC (switching output triac with zero-voltage switch) |
| Probe length: | 70 mm |
| Probe diameter: | Ø 12 mm |
| Cable length: | 3000 mm |
| Dimensions housing: | (LxWxH) 99 x 88 x 31 mm |
| Connection: | RJ12 connector |
| Operating voltage: | 230 V AC / 3 VA |
| Overvoltage protection: | Varistors at the mains input and switching output |
| Weight: | 0.2744 kg |
In modern buildings, the kitchen or bath is often featured in the middle of the room, away from a window. Forced ventilation is therefore required to ensure adequate air flow.
This innovative product is the solution for humidors such as showers, bathrooms and sanitary facilities, to prevent mould formation on the walls and posible structural damage. The fan of previous ventilation concepts was either switched on or controlled by a timer. Without regulation, such a fan cannot work efficiently or be optimized so siut the application. After a while problems such as mould formation would occur, but can be prevented by using this humidity controller. The fan only operates if necessary and the device works automatically, needs no maintenance or additional operation.
Typical areas of application
- Humidity regulation for poorly ventilated indoor bathrooms
- WC`s, shower rooms and other sanitary facilities
- Kitchens and kitchenettes
| Description: | Humidity controller |
|---|---|
| Operating temperature: | 0...+40 °C |
| Humidity measuring principle: | Capacitive humidity sensor |
| Humidity measuring range: | 0...100% RH |
| Switching point: | 70% RH or fast increase in humidity |
| Switch-on delay: | 40 s |
| Switch-off delay: | 300 s |
| Humidity Off switching input: | 230 V AC / approx. 1 mA |
| Light switching input: | 230 V AC / approx. 1 mA |
| Switching output: | 1 A/230 V/AC (switching output triac with zero-voltage switch) |
| Probe length: | 70 mm |
| Probe diameter: | Ø 12 mm |
| Cable length: | 3000 mm |
| Dimensions housing: | (LxWxH) 99 x 88 x 31 mm |
| Connection: | RJ12 connector |
| Operating voltage: | 230 V AC / 3 VA |
| Overvoltage protection: | Varistors at the mains input and switching output |
| Weight: | 0.2744 kg |
In modern buildings, the kitchen or bath is often featured in the middle of the room, away from a window. Forced ventilation is therefore required to ensure adequate air flow.
This innovative product is the solution for humidors such as showers, bathrooms and sanitary facilities, to prevent mould formation on the walls and posible structural damage. The fan of previous ventilation concepts was either switched on or controlled by a timer. Without regulation, such a fan cannot work efficiently or be optimized so siut the application. After a while problems such as mould formation would occur, but can be prevented by using this humidity controller. The fan only operates if necessary and the device works automatically, needs no maintenance or additional operation.
Typical areas of application
- Humidity regulation for poorly ventilated indoor bathrooms
- WC`s, shower rooms and other sanitary facilities
- Kitchens and kitchenettes
Similar articles
Other customers also bought
Other customers also bought
We generally offer standard shipping via DPD. You can also pick up your order yourself or ship with your own tracking number. You can select the option you prefer during the ordering process.
You find more information about this topic on our rights of withdrawal page.
You can pay with PayPal, credit card (VISA and MaserCard), payment in advance, Sofortüberweisung (direct banking) and in some cases invoice. You can find more information on the page shipping and payment.
Yes, at B+B we can manufacture customised items for you with a minimum order value of €500.00.
Certifications
Thank to the latest research, development and manufacturing technologies, as well as DIN EN ISO 3001:2015 and DIN EN 61340-5-1 certifications, we produce our products in accordance with the highest quality standards.
Calibration service
Individual manufacturing
You tell us your application and we will supply you with the right product for measurement and monitoring. We place particular emphasis on close cooperation in order to guarantee optimal product development in live with your requirements.
Location
B+B Thermo-Technik GmbH is based in the town Donaueschingen south-west Germany. From here, B+B quality products are distributed worldwide.