The pressure transducer modules of the DRMOD-I2C series transfer the measuring value as a calibrated and temperature compensated I²C digital signal. A second analogue output provides the measured values as linearised signal 0…5 VDC. A Microcontroller or Pressure controller can then directly read the pressure values via a 5-pin board connector.
The probe housing is made out of light metal (aluminium). The connection to the medium takes place over a hose connector 4/6. These transsucers show a high chemical resistance, however we recommend to make a media compatibility test especially if critical media like e.g. in electroplating applications (iron trichloride) or oils with undefined additives are used.
Areas of application:
Fill level controls
Communication corresponds to the usual I²C protocol. All technical specifications of the protocol can be found in the documentation "Serial" Interface of B + B. Log in conveniently in our download center and select "I²C communication ASIC": Download page .
Programming of customer-specific I²C address with article SHOP 0800 3000.