Pendulum sensor (GLT) | temperature & humidity | 4…20 mA | without display
€98.64
Delivery time: 1-2 weeks after receipt of payment (advance payment) or conclusion of contract
| Description: | Humdity and temperature probe |
|---|---|
| Display: | Without display |
| Shunt: | at 16V supply voltage: max. 40 Ohm, at 24V supply voltage: max. 400 Ohm |
| Measured parameter: | Humdity and temperature |
| Sensor: | Digital humidity/temperature sensor |
| Temperature measuring range: | -40...+125 °C, scaling adjustable via DIP switch |
| Operating temperature housing: | -30...+70 °C |
| Operating temperature probe tip: | -40...+125 °C |
| Response time temperature: | > 20 s |
| Temeprature drift of the measuring electronics: | ±0.01% / K referred to 23 °C |
| Humidity measuring range: | 0...100% RH (non-condensing) |
| Response time humidity: | > 20 s |
| Accuracy humidity: | ±2% RH |
| Humidity output scaling: | 0...100% RH entspricht 4...20 mA |
| Accuracy: | ±0,2 K (0...90 °C), ±0,5 K (-40...+125 °C) |
| Tube material: | Stainless steel 1.4571 |
| Tube length: | 100 mm |
| Tube diameter: | Ø 12 mm |
| Housing material: | Plastic housing |
| Dimensions housing: | (LxWxH) 59 x 65 x 38 mm |
| Connection: | Screw terminals 0.2 mm² to 1.5 mm² (AWG 26 to 16), cable gland: M16x1.5; clamping range 6.0 ... 9.5 mm |
| Output signal: | 4...20 mA |
| Operating voltage: | 16...24 V DC |
| Protective filter: | Polyethylene 25 µm, Ø 12 x 30 mm |
| Environmental data: | RoHS and REACH compliant |
| Weight: | 0.178 kg |
High-quality and precise sensor with integrated measuring transducer in the EXT design for building management systems or industrial applications. Measured variables: Temperature, humidity optionally with display output signal 0-10V or 4-20mA.
In industrial or building automation, temperature and humidity often have to be measured in places that are difficult to access. The B+B pendulum sensor of the BMS series is ideally suited for this purpose: The sensor technology is housed in a remote, slim stainless steel tube and protected from contamination by a sinter filter.
The transmitter electronics are located in a plastic housing, where the connection terminals are also located.
The output signal for the measured temperature and humidity can be 0-10 volts or 4-20mA (two-wire technology). In addition, the pendulum sensor is also available with an e-paper display.
Typical areas of application
- Industrial measurement and control technology
- Drying technology
- Monitoring of bulk solids
| Description: | Humdity and temperature probe |
|---|---|
| Display: | Without display |
| Shunt: | at 16V supply voltage: max. 40 Ohm, at 24V supply voltage: max. 400 Ohm |
| Measured parameter: | Humdity and temperature |
| Sensor: | Digital humidity/temperature sensor |
| Temperature measuring range: | -40...+125 °C, scaling adjustable via DIP switch |
| Operating temperature housing: | -30...+70 °C |
| Operating temperature probe tip: | -40...+125 °C |
| Response time temperature: | > 20 s |
| Temeprature drift of the measuring electronics: | ±0.01% / K referred to 23 °C |
| Humidity measuring range: | 0...100% RH (non-condensing) |
| Response time humidity: | > 20 s |
| Accuracy humidity: | ±2% RH |
| Humidity output scaling: | 0...100% RH entspricht 4...20 mA |
| Accuracy: | ±0,2 K (0...90 °C), ±0,5 K (-40...+125 °C) |
| Tube material: | Stainless steel 1.4571 |
| Tube length: | 100 mm |
| Tube diameter: | Ø 12 mm |
| Housing material: | Plastic housing |
| Dimensions housing: | (LxWxH) 59 x 65 x 38 mm |
| Connection: | Screw terminals 0.2 mm² to 1.5 mm² (AWG 26 to 16), cable gland: M16x1.5; clamping range 6.0 ... 9.5 mm |
| Output signal: | 4...20 mA |
| Operating voltage: | 16...24 V DC |
| Protective filter: | Polyethylene 25 µm, Ø 12 x 30 mm |
| Environmental data: | RoHS and REACH compliant |
| Weight: | 0.178 kg |
High-quality and precise sensor with integrated measuring transducer in the EXT design for building management systems or industrial applications. Measured variables: Temperature, humidity optionally with display output signal 0-10V or 4-20mA.
In industrial or building automation, temperature and humidity often have to be measured in places that are difficult to access. The B+B pendulum sensor of the BMS series is ideally suited for this purpose: The sensor technology is housed in a remote, slim stainless steel tube and protected from contamination by a sinter filter.
The transmitter electronics are located in a plastic housing, where the connection terminals are also located.
The output signal for the measured temperature and humidity can be 0-10 volts or 4-20mA (two-wire technology). In addition, the pendulum sensor is also available with an e-paper display.
Typical areas of application
- Industrial measurement and control technology
- Drying technology
- Monitoring of bulk solids
Similar articles
Other customers also bought
We generally offer standard shipping via DPD. You can also pick up your order yourself or ship with your own tracking number. You can select the option you prefer during the ordering process.
You find more information about this topic on our rights of withdrawal page.
You can pay with PayPal, credit card (VISA and MaserCard), payment in advance, Sofortüberweisung (direct banking) and in some cases invoice. You can find more information on the page shipping and payment.
Yes, at B+B we can manufacture customised items for you with a minimum order value of €500.00.