Rain detector unit in housing | 12 V AC/DC±10%
€65.51
Delivery time: 2-3 working days after receipt of payment (advance payment) or conclusion of contract
| Description: | Rain detector |
|---|---|
| Measuring principle: | Electrolytic alternating voltage measurement |
| Operating temperature: | -30...+70 °C |
| Sensor surface: | Gold-plated |
| Housing material: | ABS, light grey (RAL7035) |
| Cable gland: | M16x1.5 |
| Dimensions: | (LxWxH) 80 x 82 x 58 mm |
| Electrical connection: | Clamps 1.5 mm² |
| Analogue output: | Potential-free switching output (relay) 30 V/4 A, NO/NC contact selectable |
| Operating voltage: | 12 V AC/DC ±10% |
| Power consumption: | 60 mA, heating 80…300 mA (PTC) |
| Type of protection: | IP54 |
| Environmental data: | RoHS and REACH compliant |
| Scope of delivery: | The wall mounting kit is not included in the scope of delivery |
| Weight: | 0.209 kg |
The B + B rain sensor detects condensation in form of rain or snow. The sensitivity is freely adjustable and allows great flexibility in use. The rain detector is used for terminal control in building technology.
Basically, the rain detector is used to control end devices in building automation. The rain detector can e.g. the operation of awnings or roof windows can be controlled automatically. The switching polarity and the sensitivity are adjustable. In the most sensitive setting, the device is also suitable for detecting fog. The mast or wall bracket available as an accessory enables easy installation.
Re-design
The sensor surface has been optimized so that the reliability is increased in difficult operating conditions (e.g. driving rain). To ensure this, the tips of the sensor surface no longer run vertically downwards, but at an angle of 80 °. In addition, the individual areas of the sensor surface are now significantly narrower and thus detect rain and snow more reliably. In addition to the optimized sensor surface, automatic activation of the sensor heating has also been integrated. This is only active when the sensor surface is wet and is used to quickly dry the sensor surface and remove snow residues. In addition, there is now an adjustable switch-off delay in the rain detector. This can be set individually to approx. 90 to 330 seconds, depending on the requirements.
Features
- Functionally reliable, electrolytic measuring principle
- Detects precipitation as rain or snow
- Large, heated sensor surface for faster drying and for winter operation
- Adjustable sensitivity and switching behavior
- Universal wall / mast bracket available as an accessory
Typical areas of application
- Agriculture and gardening
- Control of ventilation hatches and roof windows
- Automatic switch for awnings and blinds
- Building management technology
- Weather stations
| Description: | Rain detector |
|---|---|
| Measuring principle: | Electrolytic alternating voltage measurement |
| Operating temperature: | -30...+70 °C |
| Sensor surface: | Gold-plated |
| Housing material: | ABS, light grey (RAL7035) |
| Cable gland: | M16x1.5 |
| Dimensions: | (LxWxH) 80 x 82 x 58 mm |
| Electrical connection: | Clamps 1.5 mm² |
| Analogue output: | Potential-free switching output (relay) 30 V/4 A, NO/NC contact selectable |
| Operating voltage: | 12 V AC/DC ±10% |
| Power consumption: | 60 mA, heating 80…300 mA (PTC) |
| Type of protection: | IP54 |
| Environmental data: | RoHS and REACH compliant |
| Scope of delivery: | The wall mounting kit is not included in the scope of delivery |
| Weight: | 0.209 kg |
The B + B rain sensor detects condensation in form of rain or snow. The sensitivity is freely adjustable and allows great flexibility in use. The rain detector is used for terminal control in building technology.
Basically, the rain detector is used to control end devices in building automation. The rain detector can e.g. the operation of awnings or roof windows can be controlled automatically. The switching polarity and the sensitivity are adjustable. In the most sensitive setting, the device is also suitable for detecting fog. The mast or wall bracket available as an accessory enables easy installation.
Re-design
The sensor surface has been optimized so that the reliability is increased in difficult operating conditions (e.g. driving rain). To ensure this, the tips of the sensor surface no longer run vertically downwards, but at an angle of 80 °. In addition, the individual areas of the sensor surface are now significantly narrower and thus detect rain and snow more reliably. In addition to the optimized sensor surface, automatic activation of the sensor heating has also been integrated. This is only active when the sensor surface is wet and is used to quickly dry the sensor surface and remove snow residues. In addition, there is now an adjustable switch-off delay in the rain detector. This can be set individually to approx. 90 to 330 seconds, depending on the requirements.
Features
- Functionally reliable, electrolytic measuring principle
- Detects precipitation as rain or snow
- Large, heated sensor surface for faster drying and for winter operation
- Adjustable sensitivity and switching behavior
- Universal wall / mast bracket available as an accessory
Typical areas of application
- Agriculture and gardening
- Control of ventilation hatches and roof windows
- Automatic switch for awnings and blinds
- Building management technology
- Weather stations
Similar articles
Other customers also bought
We generally offer standard shipping via DPD. You can also pick up your order yourself or ship with your own tracking number. You can select the option you prefer during the ordering process.
You find more information about this topic on our rights of withdrawal page.
You can pay with PayPal, credit card (VISA and MaserCard), payment in advance, Sofortüberweisung (direct banking) and in some cases invoice. You can find more information on the page shipping and payment.
Yes, at B+B we can manufacture customised items for you with a minimum order value of €500.00.
Certifications
Thank to the latest research, development and manufacturing technologies, as well as DIN EN ISO 3001:2015 and DIN EN 61340-5-1 certifications, we produce our products in accordance with the highest quality standards.
Calibration service
Individual manufacturing
You tell us your application and we will supply you with the right product for measurement and monitoring. We place particular emphasis on close cooperation in order to guarantee optimal product development in live with your requirements.
Location
B+B Thermo-Technik GmbH is based in the town Donaueschingen south-west Germany. From here, B+B quality products are distributed worldwide.