Digital controller N1200-HC USB with 3 relay outputs and 2 control circuits

Product no.: SHOP 0556 0104-10

Universal PID temperature controller with two separate programmable control outputs for applications with simultaneously active cooling and heating cycles. With auto tune, 5 alarm functions and ramp and soak program (up to 180 time segments).

Weight: 0.162 kg
1 pc 177,33 €
3 pcs 168,47 €
10 pcs 159,60 €
Delivery will be effected within 2-3 working days with receipt of payment.
Article name
Thermocouple type J, K, T, E, N, R, S or Pt100/3-wire, 0...10 V, 0...5 V, 0...50 mV, 0(4)...20 mA
Input impedance
Thermocouples and voltage: >10 MΩ, 4...20 mA, 15 Ω, Pt100; measuring current: 170 µA
Temperature measuring range
Per thermo couple, check data sheet
per thermo couple, check data sheet
2x potential-free closer Relais (SPST), max. 1.5A or 3A/250V AC (3A/30V DC), free assignment of outputs (max. 1 control output)
Type of control
PID, Autotuning, ON/OFF, auto-adaptive, two control circuits (PID/PI) for heating and cooling
Measuring rate
Internal: 15 bits, display: 12000 levels
Power supply
100...240 V AC (±10%), 50…60 Hz
2-row, 4-digit LED-Dispay, red and green
Environmental temperature
+5...+50 °C; 20...80% RH
Protection category
IP65 (frontsided)
(LxWxH) 110 x 48 x 48 mm, installation depth 97 mm
0.162 kg

The N1200 HC is a universal PID process controller. Beside the standard temperature sensors, such as Pt100 and thermocouples, it also accepts analogue inputs 0…10 V, 0…5 V, 0...50 mV, and 0(4)...20 mA. It is equipped with four physical ouputs. Two outputs can be configured as simultaneous control outputs for heating and cooling circuits. Every control output (heating/ refrigeration) has its own independent PID parameters.

The remaining outputs can be separately configured as alarms. The user can choose between five different functions for each alarm. Over an additional output the process variable or the set point can be remotely transmitted as 0(4)...20 mA signal to other devices. The ramp &soak programs can be configured with up to 180 time segments. Both cooling and heating circuits can use the auto tune and auto adaptive facility to optimise the PID control parameters.

The configuration of the controller may be done either via the front program keys or via the integrated USB interface and the NConfig software. These and many other features elevate the N1200 HC universal process controller to a real breakthrough in versatility for holding in one single instrument the major features which are needed in the vast majority of industrial processes.

Product no.: SHOP 0625 0520-100
16,39 €*
Product no.: SHOP MA1K620 0100-21
32,83 €*
Product no.: SHOP 0627 0078-100
78,79 €*
No review available for this product.

The quality of our targets reflects the quality of our future! As a certificated company B+B can grant top quality products.

B+B offers you an innovative and a wide range of products for several applications in the temperature, humidity and pressure measurement.

Payment without any risks. Trusted Shop certificated online shop with buyer protection.

An excellent warehouse system grants a short-time delivery of standard products.