- Article name
- Controller
- Input
- Thermocouples type J,K,N,E,R,S,T; Pt100 in 3-wire connection
- Input impedance
- Thermocouples and Pt100: >10MΩ
- Configuration
- Front buttons / USB
- Accuracy
- depends on input, see data sheet
- Output
- 1 changer relay SPDT, max. load 3 A / 250 V AC (3A / 30 V DC),2 N/O contacts relay SPST, max. load 3 A / 250 A C (3 A ( 30 V DC),1 logic output (Voltage pulses) 5 V DC / 20 mA
- Type of control
- ON/OFF or PID
- Measuring rate
- 55/s
- A/D converter resolution
- Internal: 15 bits, Display: 12000 levels
- Power supply
- 100...240 V AC (±10%), 50…60 Hz
- Display
- 2-row, 4-digit LED-Dispay, red and green
- Environmental conditions
- 0°C...+50°C, max. 80%RH for T<30%, linear falling until 5=% for T=40°C Interior installation with max. altitude of 2000 m
- Protection category
- IP65 at front wall (by correct installation)
- Dimensions
- (LxWxH) 100 x 48 x 48 mm Switchboard detail 45.5 x 45.5 mm, installation depth 97 mm)
- Weight
- 0.194 kg
In measurement and control technology digital indicators are used to constitute measured values or process variables.
The N480D-RRR temperature controller has been developed to combine easy handling and great performance in one device. So the N480D-RRR temperature controller is even easy to use if you are not experienced in the area of control technology. It can be connected to most thermocouple types as well as Pt100 resistance sensors. It has 3 outputs which can be programmed user-defined in 2 alarm outputs and a pulsed control output (Optionally the controller is available with a analogie 4…20 mA output). Self optimizing PID control function, a dual display and a ramp function are just a few of the standard characteristics of this powerful and reasonably priced device.
Deutsch
English