- Article name
- Controller
- Input
- Thermocouple Type J,K,N,R,S,T; Pt100 in 3-wire technique; 0...50 mV
- Input impedance
- Thermocouples, Pt100 and voltage: >10MΩ
- Configuration
- Front buttons / USB
- Accuracy
- depends on input, see data sheet
- Output
- Logic output for SSR, O/N contact SPST relay 1,5A / 240V AC / 30V DCC
- Measuring rate
- 55/s
- A/D converter resolution
- Display 12000 Levels from -1999 to 9999
- Power supply
- 100...240 V AC (±10%), 50…60 Hz
- Display
- 1-row, 4-digit LED-Dispay, red
- Environmental conditions
- 0...+50 °C
- Protection category
- IP65 at front wall (by correct installation)
- Dimensions
- (width x height x depth) 48 x 25 x 105 mm (panel cut-out 23 x 46 mm)
- Weight
- 0.15 kg
The N1020 is a small and efficient temperature controller. The controller supports almost every thermocouple types as well as Pt100 resistant sensors. The N1020 has two outputs which is autonomous configurable as control or alarm output. Based on a high-end microprocessor and a sophisticated auto-adaptive PID algorithm, it adjusts the PID parameters to reach the best control performance. The configuration of the input and output options, the alarm functions and all further functions can be activated and programmed through the keyboard on the frontside of the unit.
Features:
- Universal input
- Automatic PID configuration
- 2- output: 1 relay and 1 logical output for SSR, functions: control, alarm 1 and alarm 2
- 8 adjustable alarms
- Adjustable timer
- Functions for switch-on and switch off of the inputs, reset or ON-OFF of the timer
- Adjustable soft-start
- Ramp function
- Password protected parameter settings
- Reset of basic settings
- Flexible power supply with wide range power supply