- Article name
- Cable probe
- Temperature measuring range
- -40...+150 °C
- Sensor
- TSic 306
- Accuracy
- ±0.3 °C (10...+90 °C)
- Tube length
- 100 mm
- Tube diameter
- 6.0 mm
- Tube material
- Stainless steel 1.4571
- Cable construction
- FEP (Teflon®)/schielding/SIL, 0.22mm², multi-pin connector
- cable length
- 4000 mm
- Connection
- Multi-pin connector, 3-pole, type NSG254-3
- Power supply
- 3...5 V DC
- Output signal
- ZACWire (OWI)
- Protection category
- IP67
- Environmental data
- RoHS and REACH compliant
- Weight
- 0.13 kg
The measurement of temperature with this TSic™ Cable probe is very easy. In the temperature range between +10 and 90 °C it delivers measurement within an accuracy of ±0,3 K, which is more accurate than a platinum sensor class B DIN EN 60751.
The sensor element is protected by stainless steel tube and is connected to a 4 meter long silicon rubber cable. The probe fulfil the requirement of the IP67 ingress protection index (dust and water tight). The calibrated measurement values are digitally transmitted under a ZACWire (OWI) interface protocol which is very easy to interpret with a microcontroller.
Alternative the use may use the B+B TLOG 4 USB system to monitor or log the measured values directly on a PC The TSic™ temperature sensors are used in building automation, medical technologies and in machine construction. Due to the low power consumption they are also suitable for mobile applications.