- Article name
- Dew point controller
- Humidity measuring principle
- Resistiv dew sensor
- Switching point
- 90% RH, ±4 % factory-set
- Humidity measuring range
- 0...100% RH
- Hysteresis
- approx. 4%
- Application temperature
- 0...+60 °C
- Condensation
- allowable
- Condensation
- Short-time allowable
- Measuring medium
- Clean atmospheric air
- Response time humidity
- Ca. 30 sec. (when changing from 75% RH to condensation)
- Protective filter
- Polyethylen sintered material
- Contact rating
- Floating switching output (Relais) 24 V AC, Closer/Opener selectable
- Contact voltage
- Switching relay
- Contact resistance
- Closed: 100 Ω, opened: >1 MΩ
- Output
- Switching relay
- Switching display
- LED green (power), LED not shining (dry); LED red (condensation)
- Operating voltage
- 24 V AC ± 10%, 50 Hz or 24 V DC ± 10%
- Operating current
- Typ. 7 mA, max. 30 mA (relay active)
- Function control
- Red LED is illuminated in operating state
- Connection
- Push-in clamp 0.0509…1.31 mm² (16…30 AWG)
- Dimensions
- (LxWxH) 65 x 60 x 42 mm (without clamp and cable)
- Protection category
- IP65 (NEMA 4)
- Weight
- 0.11 kg
With the innovative measuring principle and the use of a special sensor with logarithmic characteristics, it is possible to control closely to the dew point threshold without risking condensation. The dew point controller can be mounted directly and simply on pipes with the corresponding diameter. It is completely sealed so the electronics are optimally protected.
Areas of application:
- For cooling ceilings to prevent condensation
- For indoor pools and shop display windows to keep the double glazing fog-free and prevent steaming-up.
- In drinking water and industrial plants to detect „sweating“ of cold pipes
- In Hypermarkets, Concourses, Halls, Greenhouses and Storage facilities, to detect condensation formation on cold outdoor walls, steel doors, or to protect the stonework and masonry
- In switch cabinets or in machines, to detect condensation on sensitive electronic components
- For humidity and leakage detectors
- It can be integrated into alarm or warning systems ( by the relay / opener )
- In submersible pumps for detecting leakage
Other diameters are possible on request.
Deutsch
English