- Article name
- Humidity controller
- Measuring procedure
- Capacitive humidity sensor
- Humidity measuring range
- 0...100% RH
- Application temperature
- 0...+40°C
- Switching point
- 70% RH or strong increase of moisture
- Turn-on delay
- 40 s
- Turn-off delay
- 300 s
- Switchoutput
- 1 A/230 V/AC (switching output triac with zero voltage switch)
- Switching input humidity off
- 230 V AC / ca. 1 mA
- Switching input light
- 230 V AC / ca. 1 mA
- Operating voltage
- 230 V AC / 3 VA
- Overvoltage protection
- Varistor at mains input and switch output
- Probe diameter
- 12 mm
- probe length
- 70 mm
- Housing dimensions:
- (LxWxH) 99 x 88 x 31 mm
- Cable length
- 3000 mm
- Connection
- RJ12-connection plug
- Weight
- 0.2744 kg
This innovative product is the solution for humidors such as showers, bathrooms and sanitary facilities, to prevent mould formation on the walls and posible structural damage. The fan of previous ventilation concepts was either switched on or controlled by a timer. Without regulation, such a fan cannot work efficiently or be optimized so siut the application. After a while problems such as mould formation would occur, but can be prevented by using this humidity controller. The fan only operates if necessary and the device works automatically, needs no maintenance or additional operation.
Areas of application include:
- Humidity regulation for poorly ventilated indoor bathrooms
- WC`s, shower rooms and other sanitary facilities
- Kitchens and kitchenettes