Ca. 30 sec. (when changing from 75% RH to condensation)
Polyethylen sintered material
Floating switching output (Relais) 24 V AC, Closer/Opener selectable
Closed: 100 Ω, opened: >1 MΩ
LED green (power), LED not shining (dry); LED red (condensation)
24 V AC ± 10%, 50 Hz or 24 V DC ± 10%
Red LED is illuminated in operating state
Push-in clamp 0.0509…1.31 mm² (16…30 AWG)
(LxWxH) 65 x 60 x 42 mm (without clamp and cable)
IP65 (NEMA 4)
With the innovative measuring principle and the use of a special sensor with logarithmic characteristics, it is possible to control closely to the dew point threshold without risking condensation. The dew point controller can be mounted directly and simply on pipes with the corresponding diameter. It is completely sealed so the electronics are optimally protected.
Areas of application:
For cooling ceilings to prevent condensation
For indoor pools and shop display windows to keep the double glazing fog-free and prevent steaming-up.
In drinking water and industrial plants to detect „sweating“ of cold pipes
In Hypermarkets, Concourses, Halls, Greenhouses and Storage facilities, to detect condensation formation on cold outdoor walls, steel doors, or to protect the stonework and masonry
In switch cabinets or in machines, to detect condensation on sensitive electronic components
For humidity and leakage detectors
It can be integrated into alarm or warning systems ( by the relay / opener )
In submersible pumps for detecting leakage
It is also available with other diameters..... Simply ask us !