- Article name
- Stainless steel pressure transducer
- Pressure measuring range
- 0...1 bar
- pressure measuring variant
- relative pressure
- Burst pressure
- 5 bar
- Electrical connection
- M12 connector
- Process connection
- G1/4"
- Output signal
- Digital, I²C
- Raw material
- Sensor: ceramic measuring cell
- Housing material:
- Stainless steel AISI 303
- Application temperature
- -20...+80 °C
- Temperature Coefficient
- TCO < ±0.015 % FS / K ; TCG < ±0.010 % FS / K
- Reamaining error linearity/hysteresis
- <±0.4% FS
- Permissible load
- Ra[Ω]<(Uv[Volts]-10V) / 0.02 A (for output 4...20 mA)
- Power supply
- 3,0...5,3 V DC / 5mA
- Protection category
- IP65 (NEMA 4)
- EMC-noise emission
- EN 61000-6-3: 2011
- EMC-noise withstanding
- EN 61000-6-1: 2007
Our robust stainless steel pressure transmitters with M12 connectors from B+B transmit the measured value as a temperature-compensated and calibrated standard signal 0...10 V, 4...20 mA or I²C. The proven B+B design with ceramic-capacitive measuring cells, a solid housing and integrated evaluation electronics ensures vibration and shock-resistant, continuous use.
With graduated measuring range variants, the delivery spectrum covers the pressure range from vacuum to 100 bar full scale. Extremely accurate calibration at a total of 7 measuring points at three different temperatures ensures exceptional precision and a very low residual temperature error. Accordingly, the long-term stable and corrosion-resistant ceramic cells ensure consistent accuracy and score points with their high overload capacity. This means that no manual maintenance is required when using our B+B pressure transmitters.
The pressure transmitters with M12 connectors are ideal for measuring static and dynamic absolute and relative pressures in gases or liquids. Due to technical conditions, typical areas of application include pneumatics, hydraulics and industrial applications. The sensor housing is made of stainless steel and has an IP65 degree of protection. In addition, the pressure transmitters have two different process connection options. One is a G1/4“ and the other is a G1/2” external thread. In this version, the electrical connection has an M12 connector, although other versions of the pressure transmitter are also available with a 2 m cable or an industrial plug in accordance to DIN EN 43650. This allows you to obtain your preferred measurement results adapted to your control and evaluation unit.
Customized versions are also available on request!
Areas of application:
- Food industry
- Pneumatics
- High pressure
- Fuel pumps
- Gases
- Fuel cells
Larger pressure ranges and AC operating voltages are possible on request.
I²C interface
Communication corresponds to the usual I²C protocol. All technical specifications of the protocol can be found in the documentation "Serial" Interface of B + B. Conveniently log in to our download center and enter your article number: Download center .
Note:
Programming of customer-specific I²C address with article SHOP 0800 3000.
Deutsch
English